[Oscar-users] modules-3.3.a.tar.bz2

[PREUKSCHAS, FABIEN]

Hi all,
I'm trying to rebuild oscar-modules using .spec from svn and in this file, a modules-3.3.a.tar.bz2 is called to build the rpm.

I can't find this archive anywhere on internet...

Am I missing something ?

Thanks for the answer.

[LAHAYE Olivier]

Hi,

The correct procedure to build oscar-modules is:

wget http://svn.oscar.openclustergroup.org/repos/unstable/rhel-7-x86_64/oscar-release-6.1.2r11039-1.el7.centos.noarch.rpm
yum -y install oscar-release-6.1.2r11039-1.el7.centos.noarch.rpm<http://svn.oscar.openclustergroup.org/repos/unstable/rhel-7-x86_64/oscar-release-6.1.2r11039-1.el7.centos.noarch.rpm>
yum -y install oscar-packager
oscar-config -t rhel-7-x86_64
oscar-packager -d --all modules-oscar

Otherwise, if you want to built it by hand, look inside the modules-oscar.cfg in the svn and you'll find that the required source is available here:
wget http://svn.oscar.openclustergroup.org/pkgs/downloads/modules-oscar/{modules-3.3.a.tar.bz2,Modules-Paper.doc,Modules-Paper.pdf}

Best regards.
--
Olivier LAHAYE
CEA DRT/LIST/DIR
________________________________
De : PREUKSCHAS, FABIEN [***@atos.net]
Envoyé : jeudi 9 juillet 2015 18:32
À : oscar-***@lists.sourceforge.net
Objet : [Oscar-users] modules-3.3.a.tar.bz2

Hi all,
I’m trying to rebuild oscar-modules using .spec from svn and in this file, a modules-3.3.a.tar.bz2 is called to build the rpm.

I can’t find this archive anywhere on internet…

Am I missing something ?

Thanks for the answer.